Crystal Vortex™ Aquadea Inline Basic & Premium | Under-Sink Drinking-Water Swirler
Taxes inclues Frais d'envoi calculés au paiement
Delivery time: 3 - 5 days
Pay at your own pace!
With Klarna Installment Purchase, you can split the cost of your order into up to 36 monthly installments. Currently only available in Germany.
How it works:
- When paying, select the “Pay in installments” option.
- Choose the payment plan that works best for you.
- Follow the steps and enter your details.
Once we ship your order, you will receive an email from Klarna with your payment plan.
Crystal Vortex™ Under-Sink Swirler
Aquadea Inline
Three crystals. One vertical axis of light. Invisible beneath your sink.
The Aquadea Inline is fitted permanently into the water pipe, at the point where the water passes on its way to the reverse-osmosis system. Inside its Crystal Vortex™ chambers the water is brought into a spiralling movement while it is still in the pipe, and it is ordered there in pure natural geometry. Nothing of this remains visible, and you continue to see only your familiar tap. What changes is the inner order of what flows from it.
The material level
The Venturi symbiosis – where engineering becomes alchemy
Here lies what makes this device special. The Aquadea Inline creates countless fine micro-vortices in the water. This swirled flow then passes through a cascade spanning three orders of magnitude, from the visible movement down into the finest:
Micro-vortices inside the swirler
The Crystal Vortex™ chambers set the water into a fine, spiralling movement and create countless micro-vortices.
The activated-carbon block as a Venturi resonator
The porous structure of the activated-carbon block acts like a Venturi resonator and carries the vortex movement into ever finer levels.
The osmosis membrane as a nano-Venturi
Finally the water reaches the osmosis membrane, which at the nano level becomes a Venturi in its own right, and the cascade completes itself.
Where a reverse-osmosis system would otherwise only clean the water and leave it energetically quiet, here it is kept in movement and in order along its entire path. You will find the full account in our article on the osmosis-vortex symbiosis.
Variant · 3 chambers
Inline “Triad of Light”
As with the Trinity at the tap, a composition of three crystals draws together a self-contained axis that reaches from the crown to the earth. The qualities described below follow the traditional reading of these stones.
Amethyst · above
The clear note from above
As the violet stone of harmony, it has long been associated with purification and transformation, with a calm, balancing energy and with far-sightedness.
Kunzite · centre
The warm centre
It is cherished as a stone of the heart that softens inner reactions and invites a friendly, spacious sense of ease.
Lithium Niobate · below
The anchoring
Within it, lithium joins niobium. Lithium is a light “light-bringer”, and niobium is the element of the strongest yin, which in the old reading leads back like a tone to “Mother Earth”. Together they form a strong potential vortex that links the realm of spirit with matter.
Premium variant · 9 chambers
Inline “Elevation”
If you appreciate the Basic version and would like your water to be even more alive and rich in energy: three modules arranged one behind the other, with a total of nine Crystal Vortex™ chambers, refine the water with particular intensity. The arrangement follows an ascent through different levels of consciousness and perception, aligned with the energy centres of the body, from grounding through the heart and into clarity. The alternating arrangement of titanium-gold and titanium-silver joins warm, creative presence with fine clarity.
Trust, protection and strength
Ruby in titanium-gold • Rainbow obsidian & rock crystal in titanium-silver
In the traditional reading, a powerful foundation of stability, protection, vitality and clarity.
Opening of the heart, regeneration and joy
Chrysoprase in titanium-gold • Rose quartz & orange calcite in titanium-silver
A harmonious centre associated with warmth, joy of life, an open heart and emotional balance.
Harmony, awareness and the opening of emotional spaces
Amethyst in titanium-gold • Aquamarine & Lithium Niobate in titanium-silver
A luminous composition associated with clarity, awareness, inner stillness and intuitive perception.
In their combination, an unusually many-layered water character arises. The water tastes softer still, more alive, round and exceptionally fine. According to the feedback we receive from our customers, the Elevation is experienced as the most harmonious Aquadea Inline composition and the finest in taste.
Installation
Concealed installation, ready to connect worldwide
The Aquadea Inline disappears completely beneath your sink. It is supplied with a John Guest push-fit connector, a globally standardised fitting for water lines. This removes any question of thread sizes, and the device fits almost every osmosis system and every under-sink installation. The only thing that remains visible is your familiar tap.
Composition & technical data
Aquadea® · Handcrafted in Bavaria
Lowest price in the last 30 days:
Lowest price of the last 30 days - Variant 1:
Lowest price of the last 30 days - Variant 2:
Lowest price of the last 30 days - Variant 3:
Lowest price of the last 30 days - Variant 4:
Lowest price of the last 30 days - Variant 5:
Lowest price of the last 30 days - Variant 6:
Lowest price of the last 30 days - Variant 7:
Lowest price of the last 30 days - Variant 8:
Lowest price of the last 30 days - Variant 9:
Lowest price of the last 30 days - Variant 10:
Ihr Leitungswasser im Check
Warum ein Wasserfilter für Sie sinnvoll ist
Geben Sie Ihre Postleitzahl ein und sehen Sie in Sekunden, was wirklich in Ihrem Leitungswasser steckt – Nitrat, Härte, Leitfähigkeit und mehr.
Choisir les options
Frequently Asked Questions
Kristallwirbel® drinking water swirler
The Aquadea® vortex chambers purify the water of all unwanted information and restore its dynamics and natural form. (Hexagonal structures, vortex dynamics of a mountain stream, vitality)
All our products have a thread with the thread size M22 internal thread.
So you need a threaded connection of M22 external thread on your faucet.
If you need a different thread, we offer numerous adapters to make the transition from your thread to our water swirlers or the "Okato" countertop filter.
The ToneOne has an implosion vortex chamber, reducing the flow rate to approximately 3.8 liters per minute. The Trinity has three implosion vortex chambers, reducing the flow rate to approximately 11.4 liters per minute. This, of course, depends on the water pressure at the tap.
To purify it on a material level, a water filter is needed.
The Aquadea® water swirlers clean the water of all unwanted
Information and give it back its dynamics and natural form.
(Hexagonal structures, vortex dynamics of a mountain stream, vitality)
Information about Aquadea Crystal Vortex® chamber technology
Warranty and care of AQUADEA water vortex chambers
We at AQUADEA can offer you a 2-year warranty on our product.
electroplated resonance plates such as silver, gold, ruthenium, platinum, palladium and
With rhodium, there's always the possibility that the metal coating will be damaged after prolonged use, revealing the bronze or titanium base plate. This does not change the energetic effect. In the event of a manufacturing defect, we can detect this and offer a replacement, even under the warranty. However, if the product has not been cared for properly, you must expect that you will not receive a refund for any damage. However, even if you caused the damage yourself, please contact us immediately so that we can quickly find a solution together. To prevent this from happening, read the individual care steps here so that you can preserve the quality of the products as much as possible. Signs of wear, such as minor scratches, are completely normal.
Care step by step
Step 1: Descaling with citric acid
As a basic cleaning step, you should first remove any limescale from the product. Depending on the limescale levels in different regions, you'll need to perform this process with varying frequency, so we can't make a general recommendation. However, you should check every few weeks to see if it's time again. The more regularly you do this, the easier and faster the cleaning will be.
First screw your Trinity or ToneOne and any combination
apart or unscrew the shower plate from the bell. Take a
Glass bowl, fill it about 5cm high with warm water (about 200-400mL),
Add a teaspoon of pure citric acid (e.g., Heitmann) and stir briefly. Let the items soak in the water for 5-15 minutes, depending on the degree of soiling. Then rinse with clean water.
Important! Do not use acetic acid, vinegar essences, vinegar-based products, or other cleaning agents, as these will attack or even destroy the metals and crystals.
Caution! In products containing limestone, such as larimar , lapis lazuli, and azurite-malachite, the gemstones dissolve in citric acid. If you place only the resonating plate in a shower with citric acid, you can still clean the plate. Make sure you fill the bowl with water only 1 cm deep, so that the resonating plate is in contact with the limestone, but not the limestone.
Tip! To avoid limescale deposits caused by standing water, we recommend cleaning the bundle nozzle once a day or the shower plate after showering with a
Pat dry with a dust-free, clean, and soft cotton cloth. To drain the water from the shower hose with one click, we also offer a Nito connector in our shop.
Note for bronze products: Pure bronze products and bronze products with damaged electroplating may develop green oxidation, which visually resembles verdigris. However, verdigris only develops through contact with vinegar.
Step 2: Cleaning with Hagerty Silver & Multimetal foam
Metals can oxidize, and this can lead to further contamination besides limescale. Hagerty's Silver & Multimetal Foam is available for this purpose. Using the included sponge, the foam can be gently dabbed onto the surface until it foams up. Allow it to work until it dries, then rinse the foam off with the sponge under running water. This foam is suitable for all metals and is usually sufficient with regular care.
Step 3: Cleaning with metal-specific cleaning agents
It can happen that due to insufficient care or sometimes depending on the regional water quality, more severe contamination occurs, which then requires more intensive care.
For silver and the metals ruthenium , platinum , palladium , and rhodium, we recommend Hagerty Silver Polish . You can gently dab the polish on with a cotton swab or cotton pad. Allow it to work until it dries. Rinse off the polish under running water with a very soft sponge or cloth.
For gold , which may develop brownish stains, Hagerty offers Gold Clean . For this purpose, the product is first applied to the
Liquid if the size allows. Afterwards, you can
Additionally, the oxidized areas can be cleaned using circular motions with a soft cloth dipped in the liquid. If you're cleaning a shower plate, you can skip the first step and polish the plate directly with the soaked cloth.
For bronze , which is particularly susceptible to corrosion, Hagerty also offers Copper, Brass & Bronze Polish . Bronze is robust, so you can apply a little more pressure than with galvanized products. Apply the polish, let it dry, and then rinse it off with a soft sponge under running water.
If you have further questions about the correct care or are unsure which
If you would like to know which care product is best suited for your product, please send us an email to vertrieb@aquadea.de or call us at 08135 - 99 474 55 .
All Hagerty products mentioned are available in our shop.
For an overview of our Hagerty products click here .
Your AQUADEA team
All of our products have an M22 internal thread. Therefore, you'll need an M22 external thread on your faucet. If you need a different thread, we offer numerous adapters to connect your faucet to our water swirlers or the "Okato" countertop filter.
Trinity from 1.5 bar
Tone One from 1 bar
The turbulence also occurs with less pressure, but it is not as strong.
Kristallwirbel® drinking water swirler from our factory.
" Handmade quality takes time"
Our manufactured products are created with attention to detail and the utmost care.
Each piece is unique and handcrafted using traditional methods
In order to offer you the best possible quality, we take the
necessary time. Therefore, the delivery time can currently be between 3-6 weeks.
Thank you for your patience – it’s worth it!
