Shower bell, black, with flexible hose for bathtubs with M28x1 connection – for attaching the Aquadea vortex resonance plate

Based on our experience and numerous testimonials from our customers, we can report the following, but cannot guarantee it. Hair can become much softer and you need less shampoo. The scalp feels less tight. Skin appearance can improve, and psoriasis or neurodermatitis can be reduced. You need fewer care products.

You can look at it on several levels:

• 1. Sensory information
• 5: Rather gentle and enveloping—like standing in front of a waterfall
• 6: "Rich" feeling on the skin, slightly stronger spray than the 5
• 7: Powerful and massaging: like standing under a waterfall.
• 2. Flow rate
• 5: 6-12 liters/min (good for lower water pressure in your home)
• 6-cylinder: 7-13 liters/min
• 7 Series: 8-14 liters/min
• 3. Natural geometry (arrangement of the vortex chambers in relation to each other)
• 5: Flower of Life
• 6: Venus flower
• 7: Flower of Life

The stones are cleaned, polished, and freed from negative energies. Before being installed in a shower, whirlpool, or other device, they are checked again to ensure that everything is in harmony, and only then are they installed.

Aries: Fire opal, garnet, jasper, hematite, carnelian, ruby, red tourmaline.

Taurus: Agate, aventurine, chrysocolla, malachite, moss agate, rose quartz.

Gemstone: rock crystal, gold topaz, moss agate, chalcedony, tiger's eye.

Cancer: aventurine, coral, moonstone, opal, jade, jasper, emerald.

Leo: Amber, rock crystal, gold topaz, garnet, tiger's eye, citrine.

Virgo: Amethyst, jasper, carnelian, lapis lazuli, sodalite, tiger's eye, citrine.

Libra: Aquamarine, chrysocolla, kunzite, jade, rose quartz, pink tourmaline.

Scorpio: Agate, amethyst, garnet, jasper, hematite, malachite, obsidian, red tourmaline, ruby.

Sagittarius: Amethyst, aventurine, chalcedony, chrysocolla, lapis lazuli, obsidian, sodalite, opal.

Capricorn: Rock crystal, jasper, moonstone, black tourmaline, obsidian, smoky quartz.

Aquarius: Aquamarine, chrysocolla, fluorite, blue topaz, turquoise.

Fish: Aquamarine, amethyst, jade, coral, moonstone, violet fluorite, turquoise.

For a selection of the crystals and special metals we process.

These are set at the zero point/reversal point of the swirl chamber.

Our Kristallwirbel® shower heads have a standard 1/2 inch external thread connection.

Warranty and maintenance of AQUADEA water vortex chambers

We at AQUADEA can give you a 2-year warranty on our product. With
galvanized resonance plates such as silver, gold, ruthenium, platinum, palladium, and
rhodium, there is always the possibility that the metal coating will be damaged after prolonged use and the base plate of bronze or titanium will become visible. This does not affect the energetic effect. If there is a manufacturing defect, we can identify this and offer a replacement within the warranty period. However, if the product has not been cared for properly, you should expect that you will not receive a refund in the event of damage. Nevertheless, please contact us immediately in the event of self-inflicted damage so that we can quickly find a mutual solution. To prevent this from happening in the first place, please read the individual care steps here so that you can maintain the quality of the products as far as possible, as signs of wear, such as slight scratches, are completely normal.

Care step by step

Step 1: Descaling with citric acid

As a basis for any cleaning, you should first remove limescale from the product. Depending on the limescale content in different regions, you will need to carry out this process at varying intervals, which is why we cannot give a general recommendation here. However, you should check every few weeks to see if it is time again. The more regularly this is done, the easier and quicker the cleaning will be.

First, unscrew your Trinity or ToneOne and any combinations
or unscrew the shower plate from the bell. Take a
glass bowl, fill it with warm water to a height of about 5 cm (approx. 200-400 ml),
add a teaspoon of pure citric acid (e.g., HEITMANN) and stir briefly. Leave the items in the water for 5-15 minutes, depending on how dirty they are. Then rinse with clean water.

Important! Do not use acetic acid, vinegar essences, vinegar-based products, or other cleaning agents, as these will attack or even destroy the metals and crystals.

Please note: Products containing limestone such as larimar, lapis lazuli, and azurite-malachite will dissolve in citric acid. If you only place the resonance plate of a shower in water with citric acid, you can still clean the plate. Make sure you only fill the bowl with 1 cm of water so that the resonance plate is in contact with the water, but not the limestone.

Tip! To prevent limescale deposits caused by standing water, we recommend drying the shower head once a day or the shower tray after showering with a
preferably dust-free, clean, and soft cotton cloth. To remove the water from the shower hose with a single click, we also offer a Nito connector in our shop.

Note for bronze products: Pure bronze products and bronze products with damaged electroplating may develop green oxidation, which is very similar in appearance to verdigris. However, verdigris only forms through contact with vinegar.

Step 2: Cleaning with Hagerty Silver & Multimetal foam

Metals can oxidize, which can lead to further contamination in addition to limescale. Hagerty's Silver & Multimetal Foam is the perfect solution for this. Using the sponge provided, the foam can be gently dabbed on until it foams. Leave it to work until it has dried, then rinse off the foam under running water with the sponge. This foam is suitable for all metals and is usually sufficient for regular care.

Step 3: Cleaning with metal-specific cleaning agents

Insufficient care or, in some cases, regional water quality may result in heavier soiling, which then requires more intensive care.

For silver and metals such as ruthenium, platinum, palladium, and rhodium, we recommend Hagerty Silver Polish. You can carefully dab on the polish with a cotton swab or cotton pad. Leave it on until it dries. Wash off the polish under running water with a very soft sponge or cloth.

For gold, which may develop brownish spots under certain circumstances, Hagerty offers its Gold Clean product. To use it, first place the item in the
liquid, if its size allows.
can then be cleaned again on the oxidized areas using a soft cloth that has been dipped in the liquid, using circular movements. If you are cleaning a shower tray, you can skip the first step and polish the tray directly with the soaked cloth.

For bronze, which is particularly susceptible to damage, Hagerty also offers Copper, Brass & Bronze Polish. Bronze is robust, which means that you can apply a little more pressure than with galvanized products. Apply the polish, leave it to work until it has dried, and then rinse it off with a soft sponge under running water.

If you have any further questions about proper care or are unsure which
care product is best suited for your product, please send us an email at vertrieb@aquadea.de or call us at 08135 - 99 474 55.

All Hagerty products mentioned are available in our shop.

For an overview of our Hagerty products here here.

Your AQUADEA team