Heart Coherence Crystal Vortex™ Jewellery Pendant “Pure Love” ExoPlasma-Gold | Ruby & Green Tourmaline

Based on our experience and many testimonials from our customers, we can report the following, though we cannot guarantee it. Hair can become much softer and you need less shampoo. The scalp feels less tight. The complexion can improve, and psoriasis or atopic dermatitis can be reduced. You need fewer skin care products.

You can look at it on several levels:

• 1. How it feels
• 5-chamber: rather gentle and enveloping – like standing in front of a waterfall
• 6-chamber: a “rich” feeling on the skin, hence a somewhat stronger spray than the 5-chamber
• 7-chamber: powerful and massaging – like standing in a waterfall.
• 2. Flow rate
• 5-chamber: 6-12 liters/min (good if the water pressure in your home is lower)
• 6-chamber: 7-13 liters/min
• 7-chamber: 8-14 liters/min
• 3. Natural geometry (arrangement of the vortex chambers relative to one another)
• 5-chamber: Flower of Life
• 6-chamber: Venus flower
• 7-chamber: Flower of Life

The stones are cleansed, cut and cleared of negative energies. Before each installation in a shower, vortexer or other product, we check once more that everything is in good harmony, and only then is it installed.

Aries: fire opal, garnet, jasper, hematite, carnelian, ruby, red tourmaline.

Taurus: agate, aventurine, chrysocolla, malachite, moss agate, rose quartz.

Gemini: rock crystal, golden topaz, moss agate, chalcedony, tiger’s eye.

Cancer: aventurine, coral, moonstone, opal, jade, jasper, emerald.

Leo: amber, rock crystal, golden topaz, garnet, tiger’s eye, citrine.

Virgo: amethyst, jasper, carnelian, lapis lazuli, sodalite, tiger’s eye, citrine.

Libra: aquamarine, chrysocolla, kunzite, jade, rose quartz, pink tourmaline.

Scorpio: agate, amethyst, garnet, jasper, hematite, malachite, obsidian, red tourmaline, ruby.

Sagittarius: amethyst, aventurine, chalcedony, chrysocolla, lapis lazuli, obsidian, sodalite, opal.

Capricorn: rock crystal, jasper, moonstone, black tourmaline, obsidian, smoky quartz.

Aquarius: aquamarine, chrysocolla, fluorite, blue topaz, turquoise.

Pisces: aquamarine, amethyst, jade, coral, moonstone, violet fluorite, turquoise.

To the selection of crystals and special metals we work with.

These are set at the zero point / reversal point of the vortex chamber.

Our Crystal Vortex™ shower heads have a standard 1/2-inch male thread connection.

Warranty and care of AQUADEA water vortex chambers

We at AQUADEA offer a 2-year warranty on our product. With
electroplated resonance plates such as silver, gold, ruthenium, platinum, palladium and
rhodium, it is always possible that the metal coating becomes damaged after prolonged use and the base plate of bronze or titanium becomes visible. This does not change the energetic effect in any way. In the case of a manufacturing defect, we can identify this and offer a replacement under the warranty. However, if the product has not been cared for, you must expect not to receive a refund in the event of damage. Even so, please contact us immediately in the case of self-inflicted damage as well, so that we can quickly find a solution together. To keep it from coming to that in the first place, read the individual care steps here so that you can preserve the quality of the products as far as possible – after all, signs of use such as light scratches are completely normal.

Care step by step

Step 1: Descaling with citric acid

As the basis of every cleaning, you should first remove limescale from the product. Depending on the lime content in the different regions, you will need to do this at different intervals, which is why we cannot give a general recommendation here. However, you should check every few weeks whether it is time again. The more regularly this is done, the easier and quicker the cleaning will be.

First unscrew your Trinity or ToneOne and any combinations
or unscrew the shower plate from the bell. Take a
glass bowl, fill it about 5cm high with warm water (about 200-400mL),
add one teaspoon of pure citric acid (e.g. HEITMANN) and stir briefly. Leave the products in the water for 5-15 minutes, depending on how dirty they are. Then rinse with clear water.

Important! Do not use acetic acid, vinegar essences, vinegar-based products or any other cleaning agents, as these attack or even destroy the metals and the crystals.

Caution! In products with calcareous stones such as Larimar, lapis lazuli and azurite-malachite, the gemstones dissolve in citric acid. If you place only the resonance plate of a shower in the water with citric acid, you can still clean the plate. Make sure you fill the bowl with only 1cm of water so that the resonance plate is in contact with it, but not the calcareous stone.

Tip! To avoid limescale deposits from standing water, we recommend patting the bundle nozzle dry once a day, or the shower plate after showering, with a
clean, soft cotton cloth that is as dust-free as possible. To remove the water from the shower hose with a single click, we also offer a Nito plug-in connector in our shop.

Note for bronze products: Pure bronze products, as well as bronze products with damaged electroplating, may develop a green oxidation that looks very similar to verdigris. Verdigris, however, only forms through contact with vinegar.

Step 2: Cleaning with Hagerty Silver & Multimetal foam

Metals can oxidize, and in addition to limescale this can lead to further soiling. For this purpose there is the Silver & Multimetal Foam by Hagerty. Using the enclosed sponge, carefully dab on the foam until it lathers. Let it work until it has dried on, then rinse the foam off with the sponge under running water. This foam is suitable for all metals and is normally sufficient with regular care.

Step 3: Cleaning with metal-specific cleaning agents

With insufficient care, or sometimes depending on the regional water quality, heavier soiling may occur that then requires more intensive care.

For silver and the metals ruthenium, platinum, palladium and rhodium, we recommend Hagerty Silver Polish. You can carefully dab on the polish with a cotton swab or cotton pad. Let it work until it has dried on. Wash off the polish under running water with a very soft sponge or cloth.

For gold, which may develop brownish spots under certain circumstances, Hagerty offers its so-called Gold Clean. To use it, first immerse the product in the
liquid if its size allows. Afterwards, you can additionally
clean the oxidized areas with circular movements using a soft cloth previously dipped in the liquid. If you are cleaning a shower plate, you can skip the first step and polish the plate directly with the soaked cloth.

For bronze, which is particularly susceptible, there is likewise Hagerty Copper, Brass & Bronze Polish. Bronze is robust, which is why you can apply somewhat more pressure here than with electroplated products. Apply the polish, let it work until it has dried on, and then rinse it off with a soft sponge under running water.

If you have further questions about proper care or are unsure which
care product is best suited to your product, send us an email at vertrieb@aquadea.de or call us at 08135 - 99 474 55.

All Hagerty products mentioned are available in our shop.

For an overview of our Hagerty products, click here.

Your AQUADEA team