Crystal Vortex™ Aquadea Inline Basic & Premium | Under-Sink Drinking-Water Swirler
Tax included. Shipping calculated at checkout
Delivery time: 3 - 5 days
Crystal Vortex™ Under-Sink Swirler
Aquadea Inline
Three crystals. One vertical axis of light. Invisible beneath your sink.
The Aquadea Inline is fitted permanently into the water pipe, at the point where the water passes on its way to the reverse-osmosis system. Inside its Crystal Vortex™ chambers the water is brought into a spiralling movement while it is still in the pipe, and it is ordered there in pure natural geometry. Nothing of this remains visible, and you continue to see only your familiar tap. What changes is the inner order of what flows from it.
The material level
The Venturi symbiosis – where engineering becomes alchemy
Here lies what makes this device special. The Aquadea Inline creates countless fine micro-vortices in the water. This swirled flow then passes through a cascade spanning three orders of magnitude, from the visible movement down into the finest:
Micro-vortices inside the swirler
The Crystal Vortex™ chambers set the water into a fine, spiralling movement and create countless micro-vortices.
The activated-carbon block as a Venturi resonator
The porous structure of the activated-carbon block acts like a Venturi resonator and carries the vortex movement into ever finer levels.
The osmosis membrane as a nano-Venturi
Finally the water reaches the osmosis membrane, which at the nano level becomes a Venturi in its own right, and the cascade completes itself.
Where a reverse-osmosis system would otherwise only clean the water and leave it energetically quiet, here it is kept in movement and in order along its entire path. You will find the full account in our article on the osmosis-vortex symbiosis.
Variant · 3 chambers
Inline “Triad of Light”
As with the Trinity at the tap, a composition of three crystals draws together a self-contained axis that reaches from the crown to the earth. The qualities described below follow the traditional reading of these stones.
Amethyst · above
The clear note from above
As the violet stone of harmony, it has long been associated with purification and transformation, with a calm, balancing energy and with far-sightedness.
Kunzite · centre
The warm centre
It is cherished as a stone of the heart that softens inner reactions and invites a friendly, spacious sense of ease.
Lithium Niobate · below
The anchoring
Within it, lithium joins niobium. Lithium is a light “light-bringer”, and niobium is the element of the strongest yin, which in the old reading leads back like a tone to “Mother Earth”. Together they form a strong potential vortex that links the realm of spirit with matter.
Premium variant · 9 chambers
Inline “Elevation”
If you appreciate the Basic version and would like your water to be even more alive and rich in energy: three modules arranged one behind the other, with a total of nine Crystal Vortex™ chambers, refine the water with particular intensity. The arrangement follows an ascent through different levels of consciousness and perception, aligned with the energy centres of the body, from grounding through the heart and into clarity. The alternating arrangement of titanium-gold and titanium-silver joins warm, creative presence with fine clarity.
Trust, protection and strength
Ruby in titanium-gold • Rainbow obsidian & rock crystal in titanium-silver
In the traditional reading, a powerful foundation of stability, protection, vitality and clarity.
Opening of the heart, regeneration and joy
Chrysoprase in titanium-gold • Rose quartz & orange calcite in titanium-silver
A harmonious centre associated with warmth, joy of life, an open heart and emotional balance.
Harmony, awareness and the opening of emotional spaces
Amethyst in titanium-gold • Aquamarine & Lithium Niobate in titanium-silver
A luminous composition associated with clarity, awareness, inner stillness and intuitive perception.
In their combination, an unusually many-layered water character arises. The water tastes softer still, more alive, round and exceptionally fine. According to the feedback we receive from our customers, the Elevation is experienced as the most harmonious Aquadea Inline composition and the finest in taste.
Installation
Concealed installation, ready to connect worldwide
The Aquadea Inline disappears completely beneath your sink. It is supplied with a John Guest push-fit connector, a globally standardised fitting for water lines. This removes any question of thread sizes, and the device fits almost every osmosis system and every under-sink installation. The only thing that remains visible is your familiar tap.
Composition & technical data
Aquadea® · Handcrafted in Bavaria
Lowest price in the last 30 days:
Lowest price in the last 30 days - variant 1:
Lowest price in the last 30 days - variant 2:
Lowest price in the last 30 days - variant 3:
Lowest price in the last 30 days - variant 4:
Lowest price in the last 30 days - variant 5:
Lowest price in the last 30 days - variant 6:
Lowest price in the last 30 days - variant 7:
Lowest price in the last 30 days - variant 8:
Lowest price in the last 30 days - variant 9:
Lowest price in the last 30 days - variant 10:
Choose options
Frequently asked questions
Crystal Vortex™ drinking water vortexers
Aquadea® vortex chambers cleanse the water of all unwanted information and restore its dynamism and natural form. (Hexagonal structures, the vortex dynamics of a mountain stream, vitality)
All our products have an M22 female thread.
So you need an M22 male thread connection on your faucet.
If your faucet has a different thread, we offer numerous adapters to connect your thread to our water vortexers or to the “Okato” countertop filter.
The ToneOne has one implosion vortex chamber, so its flow rate is reduced to approx. 3.8 l per minute. The Trinity has three implosion vortex chambers, and its flow rate is approx. 11.4 l per minute. This naturally depends on the water pressure at the tap.
To purify water on a material level, you need a water filter.
Aquadea® water vortexers cleanse the water of all unwanted
information and restore its dynamism and natural form.
(Hexagonal structures, the vortex dynamics of a mountain stream, vitality)
Information on the Aquadea Crystal Vortex™ chamber technology
Warranty and care of AQUADEA water vortex chambers
We at AQUADEA offer a 2-year warranty on our product. With
electroplated resonance plates such as silver, gold, ruthenium, platinum, palladium and
rhodium, it is always possible that the metal coating becomes damaged after prolonged use and the base plate of bronze or titanium becomes visible. This does not change the energetic effect in any way. In the case of a manufacturing defect, we can identify this and offer a replacement under the warranty. However, if the product has not been cared for, you must expect not to receive a refund in the event of damage. Even so, please contact us immediately in the case of self-inflicted damage as well, so that we can quickly find a solution together. To keep it from coming to that in the first place, read the individual care steps here so that you can preserve the quality of the products as far as possible – after all, signs of use such as light scratches are completely normal.
Care step by step
Step 1: Descaling with citric acid
As the basis of every cleaning, you should first remove limescale from the product. Depending on the lime content in the different regions, you will need to do this at different intervals, which is why we cannot give a general recommendation here. However, you should check every few weeks whether it is time again. The more regularly this is done, the easier and quicker the cleaning will be.
First unscrew your Trinity or ToneOne and any combinations
or unscrew the shower plate from the bell. Take a
glass bowl, fill it about 5cm high with warm water (about 200-400mL),
add one teaspoon of pure citric acid (e.g. HEITMANN) and stir briefly. Leave the products in the water for 5-15 minutes, depending on how dirty they are. Then rinse with clear water.
Important! Do not use acetic acid, vinegar essences, vinegar-based products or any other cleaning agents, as these attack or even destroy the metals and the crystals.
Caution! In products with calcareous stones such as Larimar, lapis lazuli and azurite-malachite, the gemstones dissolve in citric acid. If you place only the resonance plate of a shower in the water with citric acid, you can still clean the plate. Make sure you fill the bowl with only 1cm of water so that the resonance plate is in contact with it, but not the calcareous stone.
Tip! To avoid limescale deposits from standing water, we recommend patting the bundle nozzle dry once a day, or the shower plate after showering, with a
clean, soft cotton cloth that is as dust-free as possible. To remove the water from the shower hose with a single click, we also offer a Nito plug-in connector in our shop.
Note for bronze products: Pure bronze products, as well as bronze products with damaged electroplating, may develop a green oxidation that looks very similar to verdigris. Verdigris, however, only forms through contact with vinegar.
Step 2: Cleaning with Hagerty Silver & Multimetal foam
Metals can oxidize, and in addition to limescale this can lead to further soiling. For this purpose there is the Silver & Multimetal Foam by Hagerty. Using the enclosed sponge, carefully dab on the foam until it lathers. Let it work until it has dried on, then rinse the foam off with the sponge under running water. This foam is suitable for all metals and is normally sufficient with regular care.
Step 3: Cleaning with metal-specific cleaning agents
With insufficient care, or sometimes depending on the regional water quality, heavier soiling may occur that then requires more intensive care.
For silver and the metals ruthenium, platinum, palladium and rhodium, we recommend Hagerty Silver Polish. You can carefully dab on the polish with a cotton swab or cotton pad. Let it work until it has dried on. Wash off the polish under running water with a very soft sponge or cloth.
For gold, which may develop brownish spots under certain circumstances, Hagerty offers its so-called Gold Clean. To use it, first immerse the product in the
liquid if its size allows. Afterwards, you can additionally
clean the oxidized areas with circular movements using a soft cloth previously dipped in the liquid. If you are cleaning a shower plate, you can skip the first step and polish the plate directly with the soaked cloth.
For bronze, which is particularly susceptible, there is likewise Hagerty Copper, Brass & Bronze Polish. Bronze is robust, which is why you can apply somewhat more pressure here than with electroplated products. Apply the polish, let it work until it has dried on, and then rinse it off with a soft sponge under running water.
If you have further questions about proper care or are unsure which
care product is best suited to your product, send us an email at vertrieb@aquadea.de or call us at 08135 - 99 474 55.
All Hagerty products mentioned are available in our shop.
For an overview of our Hagerty products, click here.
Your AQUADEA team
All our products have an M22 female thread. So you need an M22 male thread connection on your faucet. If your faucet has a different thread, we offer numerous adapters to connect your thread to our water vortexers or to the “Okato” countertop filter.
Trinity from 1.5 bar
Tone One from 1 bar
Vortexing also takes place at lower pressure, but it is not as strong.
Crystal Vortex™ drinking water vortexers from our manufactory.
“Handcrafted quality takes time”
Our manufactory products are created with love for detail and the utmost care.
Each piece is one of a kind, crafted by hand in the traditional
way. To offer you the best possible quality, we take the
time it needs. That is why delivery currently may take 3-6 weeks.
Thank you for your patience – it is worth it!
